![]() Green flashing indicates the embedded system is ready (running with DHCP IP address), but the embedded processor has not established communications with the embedded system. 3 Status LED Green indicates the Host has evaluated the firmware currently running and determined it is up to date. To turn the power off for the entire system, use the switch on the rear panel. Insert the pin again for about 5 seconds to take system out of standby mode. 2 Standby Power (hole) Insert pin into hole for about 5 seconds to place in standby mode. Off indicates that the system is not receiving power. The Controller hardware has power, but the embedded processor is shut off and in the standby mode. Red indicates the system is in stand-by mode. 1 Power LED Green indicates the system has adequate power and is operating normally. Maximum BTUs 512 BTUs per hour Noise Normal Operation condition: 52 dB Average Dimensions and Weight Dimensions (H x W x D) 5.21 in x 17.30 in x 14.16 in (13.23 cm x 43.94 cm x 35.96 cm) Weight 24.91 lb/11.3 kg (Base Configuration) Rack Space 3U Power Power Supply 100 – 240V AC 50/60 Hz Maximum Power 200 Watts Compliance Safety and Emissions S-Mark/FCC Part 15/CE Mark/C-Tick/CB RoHS Compliant Front Panel The next table describes the functionality on the front of an SSP-0600. Note that each chassis has fans pushing 36 CFM. (1) HDMI Locking Cable (3 ft) (CBL-3LHDMI-xx) (1) Quick Reference Guide (this document) Specifications Environmental Temperature 32º to 104º F (0º to 40º C) Humidity 10% to 80% RH (non-condensing) Cooling 25 cubic feet per minute (CFM) recommended.(1) Mini Display Port to HDMI Cable (1 meter) (064-0222-xx). ![]() America) (064-0079-xx) or appropriate international power cord ![]() Box Contents (1) SmartMediaPro (SSP-0600) (1) Installation Kit (075-0098-xx) ![]() SSP-0600 is ideal for installations requiring high definition (HD) video switching and audio switching. The Savant SmartMediaPro (SSP-0600) Quick Reference Guide provides information necessary to install the SSP-0600, a modular A/V matrix switcher and controller. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |